A Practical Guide to Fitting a Premium Vespa Cover from Cover SMC

Keeping your beloved Vespa's body clean and free from dust and scratches matters a great deal to its owners. Using a high-quality protective cover is one of the best ways to keep the vehicle looking its best. Cover SMC products offer premium protection in a range of colours and appealing designs, from elegant black and unique patterned variants to sporty red.

Before putting on the cover, make sure your Vespa is stable on its centre stand. First wipe any dust or dirt off the body so the paint does not get scratched while the cover goes on. Also make sure the engine and exhaust have cooled down, for safety and to extend the life of the cover material.

The first step of fitting the cover is to unfold the cover and slip it on from the front of the Vespa. Slowly slide the cover over the handlebars and both mirrors until it fits snugly. Once the front is on properly, gently pull the middle section back to the rear of the cover so it wraps the seat and the rear body.

Once the whole body is covered, adjust the cover on each side so it sits neatly and is not loose. Make sure the bottom of the cover locks onto the body well so it does not come off easily when the wind blows. By following these simple steps, your beloved Vespa will be optimally protected and ready to be stored safely.